Corral

reefblueGT · 02-19-2008, 07:04 PM

Hello,
I just picked these heads up last weenend thinking I would use them for an old school motor project, but in the end it is just the same money to build a 302 with aluminum heads....so these must go!
They are machined for screw in studs, have comp cam guide plates, 1.94/1.60valves, hydraulic roller springs for around .600" lift, retainers and locks. They have had some port work done, but the bumps were never removed. They are painted black and look great, the deck surfaces look fantastic with no rusting of any sort. I do not know the history of these heads or who did the port work...I bought them used. I paid 275 for them. I would like to get that or as close as possible to that for them...will also consider trade for super clean pony wheels.
Thanks

MicahM · 02-20-2008, 09:19 PM

you say the heads are machined for screw in studs, are the studs included? are the heads ready to bolt on as is?

Thanks
Micah

reefblueGT · 02-21-2008, 08:44 AM

The studs, guide plates and springs are included. All they need to bolt on are rockers.

reefblueGT · 02-22-2008, 08:42 AM

TTT - will also consider trades for 99-01 polished cobra wheels, 03-04 deluxe gt wheels (same as the 99-01 cobras), bullitts or 95-97 cobras.

02-19-2008, 07:04 PM	#1
reefblueGT Registered User Trader Feedback: (3) Join Date: Mar 2003 Location: Alexandria, VA Posts: 95	FS: 1970 351 D0OE heads Hello, I just picked these heads up last weenend thinking I would use them for an old school motor project, but in the end it is just the same money to build a 302 with aluminum heads....so these must go! They are machined for screw in studs, have comp cam guide plates, 1.94/1.60valves, hydraulic roller springs for around .600" lift, retainers and locks. They have had some port work done, but the bumps were never removed. They are painted black and look great, the deck surfaces look fantastic with no rusting of any sort. I do not know the history of these heads or who did the port work...I bought them used. I paid 275 for them. I would like to get that or as close as possible to that for them...will also consider trade for super clean pony wheels. Thanks Last edited by reefblueGT; 02-19-2008 at 08:33 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Support the Corral ! Click Here:

Corral

Popular

Support the Corral! Click Here:

Support the Corral! Click Here:

Remove Advertisements Sponsored Links
Corral.net Advertisement

02-20-2008, 09:19 PM	#2
MicahM Registered User Trader Feedback: (3) Join Date: Jan 2007 Location: High Shoals NC Posts: 18	you say the heads are machined for screw in studs, are the studs included? are the heads ready to bolt on as is? Thanks Micah

02-21-2008, 08:44 AM	#3
reefblueGT Registered User Trader Feedback: (3) Join Date: Mar 2003 Location: Alexandria, VA Posts: 95	The studs, guide plates and springs are included. All they need to bolt on are rockers.

02-22-2008, 08:42 AM	#4
reefblueGT Registered User Trader Feedback: (3) Join Date: Mar 2003 Location: Alexandria, VA Posts: 95	TTT - will also consider trades for 99-01 polished cobra wheels, 03-04 deluxe gt wheels (same as the 99-01 cobras), bullitts or 95-97 cobras.