New best In mach1

[braceyaself]

Finally made it right off the trailor it went in the 10.s

All in all it was a good day, It could have went better the car was coming out strong but was still bogging.

Went like this

1.544 60ft
4.521 330 ft
6.966 1/8th
104.35 1/8th mph
9.089 1000ft
10.8 1/4th
126.91 1/4th mph
3 passes into the 10s best 1/8th mph at 105.8
best mph of 126.99
car needs more gear i cant see why it woudnt go 10.5s in the right conditions the car needs to come out higher on the 2 step and needs to be dailed in and possibly a aint roll bar all in all a great day!

http://s137.photobucket.com/albums/q...pingatgate.flv

http://videos.streetfire.net/video/L...908_185464.htm




i race at 7:15 im in the far lane

let me know some imput the suspension deff needs to be dailed in

[White90GT]

Nice ET, but give us a rundown on the car, engine to current suspension. For the MPH you're pulling right now, looks like you need some suspension to be running mid 10s and 6.60s-6.70s.

[93mustank]

FAIL

[braceyaself]

Originally Posted by White90GT

Nice ET, but give us a rundown on the car, engine to current suspension. For the MPH you're pulling right now, looks like you need some suspension to be running mid 10s and 6.60s-6.70s.

I have full suspension, just need to be dailed in

its a stock motor trans clutch mach 1 with a vortech superchager s trim pushing 8 psi. Intercooled the car was coming out at 5000 and was bogging on most passes so i air the slicks up a tad and it started to black track. Reason i aired them up is i forgot my tuner at home and coud not up the 2 step rpm.


Suspsension set up is the following

baseline uppers
wofle lowers
d&d k member with 150 pound front springs with stange 10 way adjustables up front and 16 way qa1s out back. everything was set to loose i never adjusted anything because i didnt have a vid of me racing so i didnt know what the car was doing. The car should go 10.5s with the suspension dailed in and the proper launch. Car also has a 6 point cage

[braceyaself]

Originally Posted by 93mustank

FAIL

vids fixed now

[93mustank]

Nice runs..........is it just me or is the video jumpy

[Nutzz]

So you saying the only mod you made to the engine is just a S trim? Something aint adding up. 8 psi nets you maybe 100 hp. You make 300ish from factory. Cant see a stock engine going that quick qith out more help. Sure the car aint strip down? Congrats though on the time..!

[bitemark46]

Nutzz, base centri kits on a 4v will get you around 415-440rwhp. I'm sure he has exhaust and such as well. Boosted 4v mod motors can make some impressive numbers. I can't wait to put my novi on my car next year.

-Mark

[89llx]

a fox body with 415-440 might go high 10,s but a mach-1 is heavy

[braceyaself]

car made 465 threw a fulll exhuast. Yes its fast for its numbers has drag wheels and a full cage 1 race seat. Should be around 3100 pounds

[89llx]

drag wheels????? yeah right

[braceyaself]

yes are you retarted?

[bitemark46]

Nice pass brace. I hope to be in that ET range when I put my novi on.

-Mark

[braceyaself]

thanks man, My car ran low 12s(n/a) so youl be able to smash that

[NA 99 SVT]

Great runs, congrats.

[bitemark46]

Originally Posted by braceyaself

thanks man, My car ran low 12s(n/a) so youl be able to smash that

thanks I hope so.

What is your tire and gear setup. I'm torn between 4.10's and a 26" tire or 4.56's and a 28" tire. I think the 4.56/28 combo would have a little higher rpms at the traps.

-Mark

[braceyaself]

Im using a 28x9 with 410s. If i was going to do i again. I would got atleast 430s with a 28x9 tire. It rolls out to be a 27.3 and lets you keep most of your gear. If you do a 456 that will prolly put you close to redline then i would go with a 28x10.5 tire . youl be near 7k threw the traps with the 456s. Witch is great for drag racing but terrible for motor. so if its just a drag car dont fear the gear lol.

[WHITEMACH]

nice run !!!

[travs92vr4]

How did that Ford GT crash????