|
||||||||||||||||||||||||||||||||
11-05-2009, 06:28 PM
|
#1 |
|
Registered User
Trader Feedback: (0)
Join Date: Dec 2002
Location: Medford NJ
Posts: 38
|
injector pulse?
Ok I have been trying to search out an answer for myself but wanted to ask this. I am going to check for injector pulse on the 2 injectors I have that arent firing. If there is no pulse should I start looking for a computer?? Also will a computer out of a 94 v6 work for a 95 v6 both are auto cars
Thanks Jon |
|
|
Support corral.net, please click our advertisers!
|
11-05-2009, 07:54 PM
|
#2 | |
|
Registered User
Trader Feedback: (1)
Join Date: Jan 2006
Location: Smithfield, RI
Posts: 464
|
i you arent getting injector pulse, check your harness at the ecm, and if you have signal there, start inspecting your harness out to the injectors.
Find something that works, then work your way out until it STOPS working... THEN you have found your problem. also dont forget to check your grounds
__________________
1994 Cobra: Slower than I want it to be! Quote:
|
|
|
|
|
|
11-07-2009, 12:06 PM
|
#3 |
|
Registered User
Trader Feedback: (0)
Join Date: Dec 2002
Location: Medford NJ
Posts: 38
|
Ok so I just checked it. I have injector pulse from all the other injectors except for number 5, and 6. I have power at the injectors but no pulse. I looked at all the wiring and the wiring and connectors look clean and not dirty or corroded. I am thinking that I need to find a computer for this car what does everyone else think??
Thanks Jon |
|
|
|
|
11-07-2009, 12:51 PM
|
#5 |
|
Registered User
Trader Feedback: (0)
Join Date: Dec 2002
Location: Medford NJ
Posts: 38
|
I was hoping for bad injectors except that I swithch the injectors around to test them before I dod anything they worked in the other spots. I am about to go out and check to see how the wiring looks at the computer.
Thanks Jon |
|
|
|
 |
| Bookmarks |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
All times are GMT -4. The time now is 08:34 PM.