Corral

Alexandros · 09-27-2009, 05:32 AM

#1 Alexandros ------------11/08
#2 Alexandros ------------11/08
#3 Alexandros ------------11/08
#4 WhiteGT-2....................10/20/08
#5 svo90mustang ...............Done Dec 9
#6 cheapertokeepher...........Done 3 Dec /svo90mustang.........Done Dec 9
#7 Cobra4683-------------done
#8 Cobra4683/mlanoux----done,C4683,mlanoux (late oct/early nov?)
#9 lthlsnke260------------Late October 2008
#10 svt2629---------------December 30th 2008
#11 89cobraa-------------6/12/2009

24 secured preorders ($50 per set) minimum to start the order process. if you were bumped try again. anyone who wants a set will have to fax jeff the required form before they are added.

Pre-order form link:
www.wheelreplicas.com/CREDITCARDDEPOSIT.doc

MJS · 10-19-2009, 03:24 AM

Anyone want to split an order with me? I got a half order the first time around, may as well make it complete. If Jeffo can confirm that the new batch will be the exact same shade as the original batch, I'm down for two - one left and one right.

-MJS

cdog347 · 10-20-2009, 03:39 AM

Do these come with center caps??? Im in, Ill fax deposit Wed.

Alexandros · 10-20-2009, 10:13 AM

Yes, center caps included as well as a plastic tool to take them out without scratching the rim.

MJS · 10-21-2009, 01:17 AM

The plastic tool broke the second time I tried to use it, instant replay for the next two tools I tried. So I keep a small flat blade screwdriver in the glovebox with a dulled tip. Best way to remove the cap is to tap the screw driver into the slot toward the center of the wheel, so the wedge part pops the cap loose. You do put minor scratches in the wheel, but they are under the cap so they are hidden.

-MJS

Alexandros · 10-21-2009, 10:33 AM

Yeah. I tried one one mine and it did not work. I tapped it hard with my hammer and it went flying off. I already messed one up like an idiot. I put the cap on the rim with the wheel on the rear axle with no lugnuts. I used a hammer and screwdriver to tap the center area so not to screw up the rim. Screwed that one up. Where can you get another one?

MJS · 10-21-2009, 01:34 PM

If you messed up a cap, I'm pretty sure Jeffo or someone at Wheel Replicas can sell you a new one. For a time, LMR had them in stock as well, they may still sell them. Original caps fit too.

-MJS

Blown85GT · 11-03-2009, 12:00 PM

To the guys that have problems with the tool, use a screwdriver(like a few people mentioned), but have an old t-shirt(or rag) and fold it over the blade and pop it off that way to prevent scratching. That's what my buddy did with his center caps on his original wheels.

vmcollier · 11-07-2009, 09:13 AM

Pardon for jumping in.

I have been looking for these for years - you guys still setting up an order? Does anyone have an pictures of these on an sn95?

runin1320 · 11-09-2009, 10:04 PM

Let's get this thing going again!!! I might be getting another '93 so I would need another 6 rims. Got to be more people out there that want some.

Alexandros · 11-10-2009, 12:38 PM

#1 Alexandros ------------11/08
#2 Alexandros ------------11/08
#3 Alexandros ------------11/08
#4 WhiteGT-2....................10/20/08
#5 svo90mustang ...............Done Dec 9
#6 cheapertokeepher...........Done 3 Dec /svo90mustang.........Done Dec 9
#7 Cobra4683-------------done
#8 Cobra4683/mlanoux----done,C4683,mlanoux (late oct/early nov?)
#9 lthlsnke260------------Late October 2008
#10 svt2629---------------December 30th 2008
#11 89cobraa-------------6/12/2009
#12 Rickety---------------11/10/2009

24 secured preorders ($50 per set) minimum to start the order process. if you were bumped try again. anyone who wants a set will have to fax jeff the required form before they are added.

Pre-order form link:
www.wheelreplicas.com/CREDITCARDDEPOSIT.doc

Half the way there........

Alexandros · 11-13-2009, 05:51 PM

12 pre-orders down, twelve to go.

venomisback · 11-29-2009, 04:28 PM

I wonder how many people (like me

) are just watching this thread...hoping to jump in once it gets to 20 units or whatever.

Alexandros · 11-29-2009, 05:45 PM

#1 Alexandros ------------11/08
#2 Alexandros ------------11/08
#3 Alexandros ------------11/08
#4 WhiteGT-2....................10/20/08
#5 svo90mustang ...............Done Dec 9
#6 cheapertokeepher...........Done 3 Dec /svo90mustang.........Done Dec 9
#7 Cobra4683-------------done
#8 Cobra4683/mlanoux----done,C4683,mlanoux (late oct/early nov?)
#9 lthlsnke260------------Late October 2008
#10 svt2629---------------December 30th 2008
#11 89cobraa-------------6/12/2009
#12 Rickety---------------11/10/2009

24 secured preorders ($50 per set) minimum to start the order process. if you were bumped try again. anyone who wants a set will have to fax jeff the required form before they are added.

Pre-order form link:
www.wheelreplicas.com/CREDITCARDDEPOSIT.doc

Half the way there........

93/04Mysticobra · 12-02-2009, 01:50 AM

I may be in. Gotta find the price. 20+ pages to look through. Got the price handy? Also is chrome an option?
Greg

venomisback · 12-02-2009, 07:07 AM

$500 a set I think...

red9250 · 12-02-2009, 12:06 PM

For those of you having problems getting the caps off, try THESE. I use those to get my caps off and they work perfectly.

93/04Mysticobra · 12-02-2009, 09:49 PM

Count me in

Slow347 · 12-03-2009, 10:58 AM

Quote:

Originally Posted by Alexandros

24 secured preorders ($50 per set) minimum to start the order process. if you were bumped try again. anyone who wants a set will have to fax jeff the required form before they are added.

Pre-order form link:
www.wheelreplicas.com/CREDITCARDDEPOSIT.doc

Half the way there........

You have a pm.

Dale

93/04Mysticobra · 12-04-2009, 01:22 AM

Everytime I click on the link it locks up my computer and never downloads the form. Can you pm it to me or post it?

MJS · 12-08-2009, 01:15 AM

Not sure how to save and post as an attachment, but here is a copy/paste of the words - copy/paste to your email or office program, fill it out and send it to the fax# at the top.

-MJS
------------------------------------------------------------------------

CREDIT CARD
DEPOSIT FORM
(f) 281-574-3138
(p)281-391-3056

THIS DOCUMENT ACTS AS A CREDIT CARD DEPOSIT FORM. THE DEPOSIT SECURES A PREORDER FOR A SET OF 93 REPLICA STYLE WHEELS (TWO LEFT, TWO RIGHT) IN SILVER FINISH, 5X4.5 PCD.

THE DEPOSIT IS NON REFUNDABLE AS THIS IS A CUSTOM ORDER BY THE MANUFACTURER, WHEEL REPLICAS. THE ORDER WILL NOT BE PLACED AT THE MANUFACTURING PLANT UNTIL ALL DEPOSITS ARE RECEIVED.

THE TOTAL DEPOSIT REQUIRED IS $50. THIS AMOUNT IS APPLICABLE TO THE TOTAL OF $500 PLUS SHIPPING CHARGES.

PLEASE PROVIDE THE FOLLOWING:

NAME AS APPEARS ON CARD: __________________________________________________ ___________

BILLING STREET ADDRESS: __________________________________________________ ______________

BILLING STATE: __________ BILLING ZIPCODE: ___________________

SHIP TO ADDRESS: __________________________________________________ _____________________

BILLING STATE: ___________ BILLING ZIPCODE: ___________________

PHONE NUMBER: __________________________________________________ ______________________

EMAIL ADDRESS: __________________________________________________ ______________________

CREDIT CARD NUMBER: __________________________________________________ _________________

CREDIT CARD EXPIRATION DATE: __________________ CREDIT CARD SECURITY CODE: ___________

SIGNATURE: __________________________________________________ DATE: ___________________

93/04Mysticobra · 12-08-2009, 06:25 AM

Got it. Thanks!

Navi243 · 12-09-2009, 02:07 PM

Quote:

Originally Posted by venomisback

I wonder how many people (like me

) are just watching this thread...hoping to jump in once it gets to 20 units or whatever.

I purchased a set the first time, and will be doing so again once it is closer to the minimum amount of people required.

I am sure we are not the only two waiting for that.

93/04Mysticobra · 12-09-2009, 07:45 PM

Faxed in my info.

SVTMAN · 12-21-2009, 10:45 PM

I will split a set. PM'ed ya MJS

MJS · 12-22-2009, 01:10 AM

Quote:

Originally Posted by SVTMAN

I will split a set. PM'ed ya MJS

PM'ed you back Jay.

Alexandros,

There is one, and maybe two members of the 1993 Cobra forum that are not members here, who have completed the form and sent Jeffo the deposit. There may be others who aren't members of the Corral, so they cannot post here to update the list. You may want to email Jeffo and see how many deposits he has so the list can be updated to reflect the actual number, and when that number goes up, we will probably see a few more members coming on board when they see it getting closer.

-MJS

Alexandros · 12-22-2009, 07:29 PM

I will do that now. Thanks MJS.

stangin' · 12-23-2009, 01:56 AM

when i get back to work after the xmas break, i will fax in my pre-order. someone remind me if i forget

. i want a set so bad and i don't even have my 5-lug conversion set up yet.

Alexandros · 12-25-2009, 10:05 PM

ttt

jeffo · 12-29-2009, 10:50 PM

Hi,
I am assuming that everyone will agree on chrome?

93/04Mysticobra · 12-29-2009, 11:47 PM

Quote:

Originally Posted by jeffo

Hi,
I am assuming that everyone will agree on chrome?

Why would you assume that?

stangin' · 12-30-2009, 01:49 AM

Quote:

Originally Posted by jeffo

Hi,
I am assuming that everyone will agree on chrome?

i hope not. i'm after silver. i was going to send in my deposit on thursday. if it's going to be chrome, i'm out guys.

jeffo · 12-30-2009, 08:09 PM

I am assuming chrome due to the fact that right after the first batch it was put down as chrome.

The factory will not do 48 left and rights in mixed finishes as the quantity is not high enough.

93/04Mysticobra · 12-30-2009, 08:53 PM

I'm 99% sure its silver not chrome. Look at the price.

stangin' · 12-30-2009, 09:48 PM

we need to get the final word on this silver or chrome issue. who gets the make the final decision?

10-19-2009, 03:24 AM	#737
MJS Registered User Trader Feedback: (2) Join Date: Sep 2007 Location: Mesa AZ Posts: 417	Anyone want to split an order with me? I got a half order the first time around, may as well make it complete. If Jeffo can confirm that the new batch will be the exact same shade as the original batch, I'm down for two - one left and one right. -MJS __________________ "How do you tell a communist? Well, it's someone who reads Marx and Lenin. And how do you tell an anti-Communist? It's someone who understands Marx and Lenin." - Ronald Reagan

10-20-2009, 03:39 AM	#738
cdog347 Registered User Trader Feedback: (0) Join Date: Oct 2009 Location: Rockford Il Posts: 20	Do these come with center caps??? Im in, Ill fax deposit Wed. Last edited by cdog347; 10-20-2009 at 03:45 AM. Reason: punctuation

10-21-2009, 01:17 AM	#740
MJS Registered User Trader Feedback: (2) Join Date: Sep 2007 Location: Mesa AZ Posts: 417	The plastic tool broke the second time I tried to use it, instant replay for the next two tools I tried. So I keep a small flat blade screwdriver in the glovebox with a dulled tip. Best way to remove the cap is to tap the screw driver into the slot toward the center of the wheel, so the wedge part pops the cap loose. You do put minor scratches in the wheel, but they are under the cap so they are hidden. -MJS __________________ "How do you tell a communist? Well, it's someone who reads Marx and Lenin. And how do you tell an anti-Communist? It's someone who understands Marx and Lenin." - Ronald Reagan

10-21-2009, 01:34 PM	#742
MJS Registered User Trader Feedback: (2) Join Date: Sep 2007 Location: Mesa AZ Posts: 417	If you messed up a cap, I'm pretty sure Jeffo or someone at Wheel Replicas can sell you a new one. For a time, LMR had them in stock as well, they may still sell them. Original caps fit too. -MJS __________________ "How do you tell a communist? Well, it's someone who reads Marx and Lenin. And how do you tell an anti-Communist? It's someone who understands Marx and Lenin." - Ronald Reagan

11-03-2009, 12:00 PM	#743
Blown85GT Registered User Trader Feedback: (2) Join Date: Mar 2001 Location: MN Posts: 480	To the guys that have problems with the tool, use a screwdriver(like a few people mentioned), but have an old t-shirt(or rag) and fold it over the blade and pop it off that way to prevent scratching. That's what my buddy did with his center caps on his original wheels. __________________ '89 Notch: 3O4, Novi 2K/12psi, TFS heads, TFS Stage 1 cam, Cobra Intake, Tremec, Spec Stg. 2, C springs, Konis,MM CC plates, Cobra brake conversion w/ Bullitt wheels, and more crap. 12.621@118.87 with no tune- New BBK Long tubes, x-pipe and Tweecer RT and 436rwhp/432rwtq.

Support the Corral ! Click Here:

Corral

Popular

Support the Corral! Click Here:

Support the Corral! Click Here:

09-27-2009, 05:32 AM	#736
Alexandros Registered User Trader Feedback: (3) Join Date: Apr 2003 Location: MD Posts: 1,557	#1 Alexandros ------------11/08 #2 Alexandros ------------11/08 #3 Alexandros ------------11/08 #4 WhiteGT-2....................10/20/08 #5 svo90mustang ...............Done Dec 9 #6 cheapertokeepher...........Done 3 Dec /svo90mustang.........Done Dec 9 #7 Cobra4683-------------done #8 Cobra4683/mlanoux----done,C4683,mlanoux (late oct/early nov?) #9 lthlsnke260------------Late October 2008 #10 svt2629---------------December 30th 2008 #11 89cobraa-------------6/12/2009 24 secured preorders ($50 per set) minimum to start the order process. if you were bumped try again. anyone who wants a set will have to fax jeff the required form before they are added. Pre-order form link: www.wheelreplicas.com/CREDITCARDDEPOSIT.doc

Remove Advertisements Sponsored Links
Corral.net Advertisement

10-20-2009, 10:13 AM	#739
Alexandros Registered User Trader Feedback: (3) Join Date: Apr 2003 Location: MD Posts: 1,557	Yes, center caps included as well as a plastic tool to take them out without scratching the rim.

10-21-2009, 10:33 AM	#741
Alexandros Registered User Trader Feedback: (3) Join Date: Apr 2003 Location: MD Posts: 1,557	Yeah. I tried one one mine and it did not work. I tapped it hard with my hammer and it went flying off. I already messed one up like an idiot. I put the cap on the rim with the wheel on the rear axle with no lugnuts. I used a hammer and screwdriver to tap the center area so not to screw up the rim. Screwed that one up. Where can you get another one?

11-07-2009, 09:13 AM	#744
vmcollier Registered User Trader Feedback: (0) Join Date: Dec 2006 Location: Central NJ Posts: 4	seriously fan blades for my SN95? Pardon for jumping in. I have been looking for these for years - you guys still setting up an order? Does anyone have an pictures of these on an sn95?

11-09-2009, 10:04 PM	#745
runin1320 Registered User Trader Feedback: (2) Join Date: May 2000 Location: IL Posts: 300	Let's get this thing going again!!! I might be getting another '93 so I would need another 6 rims. Got to be more people out there that want some.

11-10-2009, 12:38 PM	#746
Alexandros Registered User Trader Feedback: (3) Join Date: Apr 2003 Location: MD Posts: 1,557	#1 Alexandros ------------11/08 #2 Alexandros ------------11/08 #3 Alexandros ------------11/08 #4 WhiteGT-2....................10/20/08 #5 svo90mustang ...............Done Dec 9 #6 cheapertokeepher...........Done 3 Dec /svo90mustang.........Done Dec 9 #7 Cobra4683-------------done #8 Cobra4683/mlanoux----done,C4683,mlanoux (late oct/early nov?) #9 lthlsnke260------------Late October 2008 #10 svt2629---------------December 30th 2008 #11 89cobraa-------------6/12/2009 #12 Rickety---------------11/10/2009 24 secured preorders ($50 per set) minimum to start the order process. if you were bumped try again. anyone who wants a set will have to fax jeff the required form before they are added. Pre-order form link: www.wheelreplicas.com/CREDITCARDDEPOSIT.doc Half the way there........ Last edited by Alexandros; 11-13-2009 at 05:01 PM.

11-13-2009, 05:51 PM	#747
Alexandros Registered User Trader Feedback: (3) Join Date: Apr 2003 Location: MD Posts: 1,557	12 pre-orders down, twelve to go.

11-29-2009, 04:28 PM	#748
venomisback Registered User Trader Feedback: (2) Join Date: Mar 2002 Location: McDonald, PA Posts: 362	I wonder how many people (like me ) are just watching this thread...hoping to jump in once it gets to 20 units or whatever. __________________ 1993 Cobra #2931 2011 GT

11-29-2009, 05:45 PM	#749
Alexandros Registered User Trader Feedback: (3) Join Date: Apr 2003 Location: MD Posts: 1,557	#1 Alexandros ------------11/08 #2 Alexandros ------------11/08 #3 Alexandros ------------11/08 #4 WhiteGT-2....................10/20/08 #5 svo90mustang ...............Done Dec 9 #6 cheapertokeepher...........Done 3 Dec /svo90mustang.........Done Dec 9 #7 Cobra4683-------------done #8 Cobra4683/mlanoux----done,C4683,mlanoux (late oct/early nov?) #9 lthlsnke260------------Late October 2008 #10 svt2629---------------December 30th 2008 #11 89cobraa-------------6/12/2009 #12 Rickety---------------11/10/2009 24 secured preorders ($50 per set) minimum to start the order process. if you were bumped try again. anyone who wants a set will have to fax jeff the required form before they are added. Pre-order form link: www.wheelreplicas.com/CREDITCARDDEPOSIT.doc Half the way there........

12-02-2009, 01:50 AM	#750
93/04Mysticobra Registered User Trader Feedback: (0) Join Date: Aug 2008 Location: Lacey WA Posts: 35	I may be in. Gotta find the price. 20+ pages to look through. Got the price handy? Also is chrome an option? Greg Last edited by 93/04Mysticobra; 12-02-2009 at 02:00 AM.

12-02-2009, 07:07 AM	#751
venomisback Registered User Trader Feedback: (2) Join Date: Mar 2002 Location: McDonald, PA Posts: 362	$500 a set I think... __________________ 1993 Cobra #2931 2011 GT

12-02-2009, 12:06 PM	#752
red9250 Registered User Trader Feedback: (9) Join Date: Jul 2002 Location: Texas Posts: 420	For those of you having problems getting the caps off, try THESE. I use those to get my caps off and they work perfectly.

12-02-2009, 09:49 PM	#753
93/04Mysticobra Registered User Trader Feedback: (0) Join Date: Aug 2008 Location: Lacey WA Posts: 35	Count me in

12-04-2009, 01:22 AM	#755
93/04Mysticobra Registered User Trader Feedback: (0) Join Date: Aug 2008 Location: Lacey WA Posts: 35	Everytime I click on the link it locks up my computer and never downloads the form. Can you pm it to me or post it?

12-08-2009, 01:15 AM	#756
MJS Registered User Trader Feedback: (2) Join Date: Sep 2007 Location: Mesa AZ Posts: 417	Not sure how to save and post as an attachment, but here is a copy/paste of the words - copy/paste to your email or office program, fill it out and send it to the fax# at the top. -MJS ------------------------------------------------------------------------ CREDIT CARD DEPOSIT FORM (f) 281-574-3138 (p)281-391-3056 THIS DOCUMENT ACTS AS A CREDIT CARD DEPOSIT FORM. THE DEPOSIT SECURES A PREORDER FOR A SET OF 93 REPLICA STYLE WHEELS (TWO LEFT, TWO RIGHT) IN SILVER FINISH, 5X4.5 PCD. THE DEPOSIT IS NON REFUNDABLE AS THIS IS A CUSTOM ORDER BY THE MANUFACTURER, WHEEL REPLICAS. THE ORDER WILL NOT BE PLACED AT THE MANUFACTURING PLANT UNTIL ALL DEPOSITS ARE RECEIVED. THE TOTAL DEPOSIT REQUIRED IS $50. THIS AMOUNT IS APPLICABLE TO THE TOTAL OF $500 PLUS SHIPPING CHARGES. PLEASE PROVIDE THE FOLLOWING: NAME AS APPEARS ON CARD: __________________________________________________ ___________ BILLING STREET ADDRESS: __________________________________________________ ______________ BILLING STATE: __________ BILLING ZIPCODE: ___________________ SHIP TO ADDRESS: __________________________________________________ _____________________ BILLING STATE: ___________ BILLING ZIPCODE: ___________________ PHONE NUMBER: __________________________________________________ ______________________ EMAIL ADDRESS: __________________________________________________ ______________________ CREDIT CARD NUMBER: __________________________________________________ _________________ CREDIT CARD EXPIRATION DATE: __________________ CREDIT CARD SECURITY CODE: ___________ SIGNATURE: __________________________________________________ DATE: ___________________

12-08-2009, 06:25 AM	#757
93/04Mysticobra Registered User Trader Feedback: (0) Join Date: Aug 2008 Location: Lacey WA Posts: 35	Got it. Thanks!

12-09-2009, 07:45 PM	#759
93/04Mysticobra Registered User Trader Feedback: (0) Join Date: Aug 2008 Location: Lacey WA Posts: 35	Faxed in my info.

12-21-2009, 10:45 PM	#760
SVTMAN Registered User Trader Feedback: (412) Join Date: Oct 2002 Location: Illinois Posts: 646	I will split a set. PM'ed ya MJS __________________ Thanks Jay

12-22-2009, 07:29 PM	#762
Alexandros Registered User Trader Feedback: (3) Join Date: Apr 2003 Location: MD Posts: 1,557	I will do that now. Thanks MJS.

12-23-2009, 01:56 AM	#763
stangin' Registered User Trader Feedback: (15) Join Date: Nov 1999 Location: Bay Area, CA Posts: 1,331	when i get back to work after the xmas break, i will fax in my pre-order. someone remind me if i forget. i want a set so bad and i don't even have my 5-lug conversion set up yet. __________________ 1990 LX Convertible Triple Black 462rwhp 438rwtq 1993 Black Notchback stock

12-25-2009, 10:05 PM	#764
Alexandros Registered User Trader Feedback: (3) Join Date: Apr 2003 Location: MD Posts: 1,557	ttt

12-29-2009, 10:50 PM	#765
jeffo Corral Member Trader Feedback: (1) Join Date: Jun 2002 Location: tx Posts: 620	Finish Hi, I am assuming that everyone will agree on chrome? __________________ 2006 Redfire GT SSS 304 Catback - www.sss-exhaust.com 20 inch 454 Motorsport Wheels - www.wheelreplicas.com Motorsport K Spring Kit www.tommievaughnmotors.com 1988 GT Convertible Project Car

12-30-2009, 08:09 PM	#768
jeffo Corral Member Trader Feedback: (1) Join Date: Jun 2002 Location: tx Posts: 620	finish I am assuming chrome due to the fact that right after the first batch it was put down as chrome. The factory will not do 48 left and rights in mixed finishes as the quantity is not high enough. __________________ 2006 Redfire GT SSS 304 Catback - www.sss-exhaust.com 20 inch 454 Motorsport Wheels - www.wheelreplicas.com Motorsport K Spring Kit www.tommievaughnmotors.com 1988 GT Convertible Project Car

12-30-2009, 08:53 PM	#769
93/04Mysticobra Registered User Trader Feedback: (0) Join Date: Aug 2008 Location: Lacey WA Posts: 35	I'm 99% sure its silver not chrome. Look at the price. __________________ 2004 Mystichrome Cobra, #1012/3768 04 Cobra, #258/1010 Mystichromes, Born 12/22/03

12-30-2009, 09:48 PM	#770
stangin' Registered User Trader Feedback: (15) Join Date: Nov 1999 Location: Bay Area, CA Posts: 1,331	we need to get the final word on this silver or chrome issue. who gets the make the final decision? __________________ 1990 LX Convertible Triple Black 462rwhp 438rwtq 1993 Black Notchback stock

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode