Go Back   Corral Forums > General Tech Forums > Drag Racing

Notices

Reply
 
Thread Tools Display Modes
Old 08-09-2008, 02:30 AM   #316
Mr.Blue
Registered User
 
Mr.Blue's Avatar

Trader Feedback: (34)
 
Join Date: Nov 2006
Location: Northwest,FL
Posts: 397

Quote:
Originally Posted by Mr.Blue View Post
Wifes car

'91 LX hatch AOD/5.0

Mods:
150,000 + miles
75 PMAS/65mm TB/ TFS street heat
'96 exploder heads (unknown mileage-untouched) 1.6 rollers
Stock cam
Mac 1-5/8 LT's/ 2-1/2 H-pipe/ '3in Pro-dumps
TCI crap 1800 stall
Lentech street valvebody
FRPP Alum. shaft
4.10's
90/10's, Moroso frt. springs
50/50's with ebay upper/lowers
M/T 235-60 DR's
Centerline autodrags, 15x3/15x7
Race seats/FR manual rack and minor weight reduction

5-2-08
1.78- '60
8.05- ET
85.21- MPH

Not bad for a fairly basic combo anyone on a mild budget could put together. really needs a 2400 or so stall and it would probably go some 7's......................or maybe a stick swap
Swapped on a GT40 intake/75mm TB in place of the TFS/65mm TB.........

8-8-08
1.73- '60
7.92- ET
86.07- MPH
__________________
'89 GT: STOCK shortblock 5spd./TW/SYSTEMAX/N4=6.80@100.42
Rodney Tolleson #008 ALL MOTOR ALL THE TIME

Last edited by Mr.Blue; 08-09-2008 at 02:33 AM.
Mr.Blue is offline   Reply With Quote
Old 08-09-2008, 03:28 PM   #317
FN RCKT
Registered User
 
FN RCKT's Avatar

Trader Feedback: (4)
 
Join Date: May 2007
Location: Ocklawaha, Fl
Posts: 1,214

Quote:
Originally Posted by FN RCKT View Post
My street car. It's very effecient et wise in the 1/8th mile. I just went a 6.34 @ 107mph w/a 1.43-60' at the NMRA opener in Bradenton. I'm car #60


Guess I'll update mine too. On my first full pass at pinks in Gainesville, I decide to set it on kill (jetted it up from a 150 to a 250), and try to put it in the 9's. Well, it rolled out, put up a 1.40-60', but I broke the trans when I shifted into third. Still went 6.26 in the 1/8th, even though it was only running 96mph. So, its in peices at the moment, trans is out, about to be sent off and rebuilt, motors out getting a freshening, and another kit, And it will have a 'moly 10pt cage in it before it hits the track again.
__________________
1993 Coupe Street car with full interior and no cage has run a 1.40-60' with a best 1/4 of 10.12@133mph. On ET Street Radials
"Life is tough. Its even tougher when you're stupid" -John Wayne
FN RCKT is offline   Reply With Quote
Old 08-09-2008, 11:04 PM   #318
Bullitt4456
Registered User

Trader Feedback: (2)
 
Join Date: Jul 2003
Location: Fredericksburg, Va.
Posts: 181

6.97@98mph. 01 bullitt stock longblock. S-trim and cams.
Bullitt4456 is offline   Reply With Quote
Old 08-17-2008, 02:11 AM   #319
Mr.Blue
Registered User
 
Mr.Blue's Avatar

Trader Feedback: (34)
 
Join Date: Nov 2006
Location: Northwest,FL
Posts: 397

Quote:
Originally Posted by Mr.Blue View Post
Swapped on a GT40 intake/75mm TB in place of the TFS/65mm TB.........

8-8-08
1.73- '60
7.92- ET
86.07- MPH
UPDATE:
8-15-08

1.70- '60
7.88- 1/8TH.
86.20- MPH
__________________
'89 GT: STOCK shortblock 5spd./TW/SYSTEMAX/N4=6.80@100.42
Rodney Tolleson #008 ALL MOTOR ALL THE TIME
Mr.Blue is offline   Reply With Quote
Old 08-18-2008, 01:42 AM   #320
ratedz
Registered User
 
ratedz's Avatar

Trader Feedback: (3)
 
Join Date: Aug 2006
Location: Ohio
Posts: 951

6.9790@98.26

306 w/67mm
__________________
1986 Mustang GT
skilledit.com
ratedz is offline   Reply With Quote
Old 08-18-2008, 09:39 AM   #321
White90GT
Registered User

Trader Feedback: (0)
 
Join Date: Jun 2000
Location: Baytown, TX USA
Posts: 2,248

A slightly newer best done back in May or June
1.46 sixty
6.56 1/8
105.2 mph

New best 1/4 mile August 2nd at HRP
1.52 sixty
6.61 1/8
106.1 mph
10.37 1/4
131.2 mph

2950 lbs race weight, 427ci pump gas mix with a little 111.
__________________
Carl S.: 427ci, AFR 225s, Ported Vic Jr, Holley 850, CircleD 9" 4400 rpm converter, C4, 4.10s, 3000 lbs raceweight. 10.30s all motor/pump gas baby!
Sponsors: Smokin Tires Racing, Southern Creationz.net

http://i269.photobucket.com/albums/jj77/carlrenee1/sigpic1-1.jpg
White90GT is offline   Reply With Quote
Old 08-18-2008, 10:53 AM   #322
mrtbolt64
Registered User
 
mrtbolt64's Avatar

Trader Feedback: (2)
 
Join Date: Jan 2003
Location: Carroll, Ohio
Posts: 1,051

8-15-08

1.43 60ft off foot brake
6.13 @ 113mph 1/8 mile
9.59 @ 142 1/4 mile
__________________
Mods: Trick aluminum valve covers, fancy dancy extra thick spark plug wires, and some redneck glass packs. 9.22@147 3245lbs and shifting at 6400 on a 275/60/15

The dump truck making a pass http://s205.photobucket.com/albums/bb37/98grdpoundr/?action=view&current=chad936144.flv
mrtbolt64 is offline   Reply With Quote
Old 08-18-2008, 12:53 PM   #323
JIMS SVT
Registered User
 
JIMS SVT's Avatar

Trader Feedback: (5)
 
Join Date: Mar 2001
Location: Cincinnati,OH
Posts: 1,658

5.96 @ 120.2 1/8
9.22 @ 150.4 1/4
__________________
1998 turbo cobra TH400 GTS78
1.29 60ft
5.73 @ 123.2 1/8
8.93 @ 153.2 1/4
JIMS SVT is online now   Reply With Quote
Old 08-18-2008, 11:25 PM   #324
347fairmont
Registered User
 
347fairmont's Avatar

Trader Feedback: (4)
 
Join Date: Dec 2007
Location: sothwest virginia
Posts: 67

78 fairmont 2700 lbs

7.22 86.80mph leaving off footbrake at only 2400 got that prob fixed brakes will now hold it to3600 can't wait to go back
__________________
n/a 347 procomp heads funnel web intake tfs stage3
4.56 8.8 stock suspension 60' 1.632 330'4.826
1/8 7.193 mph 86.80 1978 Fairmont the first fox
347fairmont is offline   Reply With Quote
Old 08-19-2008, 02:57 AM   #325
itsrlong
Registered User
 
itsrlong's Avatar

Trader Feedback: (9)
 
Join Date: Jul 2003
Location: Conover, N.C.
Posts: 1,313

You got any videos of your turbo Cobra running? rlong@charter.net


Quote:
Originally Posted by JIMS SVT View Post
5.96 @ 120.2 1/8
9.22 @ 150.4 1/4
itsrlong is offline   Reply With Quote
Old 08-19-2008, 05:53 AM   #326
JIMS SVT
Registered User
 
JIMS SVT's Avatar

Trader Feedback: (5)
 
Join Date: Mar 2001
Location: Cincinnati,OH
Posts: 1,658

Quote:
Originally Posted by itsrlong View Post
You got any videos of your turbo Cobra running? rlong@charter.net
Theres a few old ones over on Modulardepot.com/forums
__________________
1998 turbo cobra TH400 GTS78
1.29 60ft
5.73 @ 123.2 1/8
8.93 @ 153.2 1/4
JIMS SVT is online now   Reply With Quote
Old 08-22-2008, 11:34 PM   #327
90NotchLX
Registered User
 
90NotchLX's Avatar

Trader Feedback: (0)
 
Join Date: Jul 2004
Location: Loxahatchee/Pembroke Pines, FL
Posts: 808

Quote:
Originally Posted by 90NotchLX View Post
Update ont this. My Falcon 6.409@106 on motor. My Stang 7.11@97 on spray and my Dads 77 Mustang 5.76@122 on motor.

This weekend in my Falcon I would of had a new best with D/R. I went 6.422@104 with 100lbs added to the car and a restrictor plate. Oh well next time

My Falcon 6.385@106 and MY Mustang 7.971@85 both on motor
__________________
Streetcar 90 Notch Stock 69 351W C6 trans 8.8 with 3.73, Strange 31spline axles and spool

Racecar 68 Falcon FE487ci PowerGlide trans. 9' with 4.56 with 33spline axles and spool FE is blown up. BBF 503ci coming soon
90NotchLX is offline   Reply With Quote
Old 08-28-2008, 09:22 PM   #328
turbotom2
Registered User
 
turbotom2's Avatar

Trader Feedback: (0)
 
Join Date: Sep 2006
Location: Florida
Posts: 110

7.35 at 97 On motor)

Spinning bad though. Only a 1.68 60 ft


Have not ran it on N2O yet (jetted for 125 shot)
__________________
1979 Capri, 351W, Edelbrock RPM heads, 2660 lbs , Edelbrock 351 intake, 10.1 compression, BBK longtubes, C-4 w/ transbrake, arms. 11.17 at 120.77 on motor, 1.42 60ft/ 10.22 at 131.83 on 100 shot
turbotom2 is offline   Reply With Quote
Old 08-28-2008, 10:46 PM   #329
WHITEMACH
Registered User
 
WHITEMACH's Avatar

Trader Feedback: (8)
 
Join Date: Feb 2008
Location: drivers seat
Posts: 620

6.40@111.95
WHITEMACH is offline   Reply With Quote
Old 09-04-2008, 06:28 PM   #330
spankustang
Registered User

Trader Feedback: (0)
 
Join Date: Mar 2003
Location: Cole Camp, Missouri
Posts: 47

5.41 at 138 on 275/60 drag radials
90 Coupe #3180 w/driver
__________________
90 coupe
A4 347 PT-91.5
Highports, Igloo
8.26@172 275/60 drag radials
spankustang is offline   Reply With Quote
Old 09-04-2008, 10:23 PM   #331
fast281
Registered User

Trader Feedback: (5)
 
Join Date: Feb 2003
Location: Nashville, TN
Posts: 308

man, you guys are fast.

7.6's @ 92mph with 1.7 60fts
3300lbs with driver
__________________
89 Saleen, 347ci
361rwhp / 379rwtq
fast281 is offline   Reply With Quote
Old 09-07-2008, 10:43 PM   #332
possessed 1
Registered User
 
possessed 1's Avatar

Trader Feedback: (5)
 
Join Date: Feb 2005
Location: ELMHURST ,IL
Posts: 523

so far 12th pass on new set up testing .

1.31 60ft

5.34 at 135 mph

8.60 AT 146mph getting out it ... blew and oring in the injector leaking fuel

hoping to get out and test some more on friday saterday..


Neil
__________________
possessed racing and fabracation


8.35 @ 166

Last edited by possessed 1; 09-07-2008 at 10:47 PM.
possessed 1 is offline   Reply With Quote
Old 09-07-2008, 11:48 PM   #333
Ehardy1971
I'm NOT Ed!
 
Ehardy1971's Avatar

Trader Feedback: (10)
 
Join Date: Aug 2002
Location: Alabama
Posts: 14,305

9.2 @76.49 mph
2.1 60'

On 235/45 17 Kumho ecsta street tires,94*,85% humidity,and spinning like crazy.
__________________
89 LX Coupe,ex 4 banger,Currently 306 powered
89 GT 'vert-SOLD
_____________________________________________
Quote:
Originally Posted by bgjohnson View Post
But I was on him like a Mustang preying on a 1996 Hyundai Elantra.
Ehardy1971 is offline   Reply With Quote
Old 09-12-2008, 06:54 PM   #334
3cRider
Registered User

Trader Feedback: (0)
 
Join Date: Jul 2008
Location: SoCal
Posts: 46

9.334 at 80.57 with 2.345 60 Ft First time out with the car and with a muscle car, I come from the VW scene. It's on 275/60-15 BFG Street Radials. I suppose the MPH should be good for mid 8's, I hope.

'92 CHP Notch

Cobra Intake Mani & 1.7 Roller Rockers
Stock/debaffled airbox
Ford MS shorties
BBK catted H
Stock mufflers dumped
3.73s
Alum driveshaft
pulleys
Lakewood 50/50s
Eibach Dragback
Slapper Bars
Draglites (skinnies up front)
Pro 5.0 Shifter
Centerforce clutch

I need more seat time, this thing doesn't hook at all!!!
3cRider is offline   Reply With Quote
Old 09-21-2008, 12:37 PM   #335
lbass
Registered User
 
lbass's Avatar

Trader Feedback: (1)
 
Join Date: Mar 2002
Location: illinois
Posts: 199

5.75@122.02
9.03@152.75

Dart block 331, hyd roller, ysi supercharger, pms, power glide 30lbs of boost & only 19 degrees total timing
__________________
Special thanks goes out to Donathen racing (302man)
Mustang Muscle Dyno Service, TMOSS ported edlebrock performer rpm intake
Kurgan Motorsports, Freezy74 for the cam, 8.96@155.19
lbass is offline   Reply With Quote
Old 10-01-2008, 06:18 PM   #336
5.0roy
Registered User
 
5.0roy's Avatar

Trader Feedback: (1)
 
Join Date: Nov 2000
Location: new jersey u.s.a.
Posts: 1,175

Quote:
Originally Posted by 5.0roy View Post
6.872 @ 101.15 with a lousy 1.55 60'. 347 tfs high ports, victor 5.0, comp solid, 4.56's, 28x10's & wolfe racecraft suspension(uppers,lowers & swaybar) best 60' 1.43
update, 6.76 @ 101.17....1.45 60ft......88 coupe went 7.19 @ 95.21, 1.58 60ft.
__________________
93gt...10.48 @ 128.19, 88 notch...10.98 @ 123, 90 triple black gt.......I need a hooptie.......
5.0roy is offline   Reply With Quote
Old 10-02-2008, 11:59 AM   #337
TeamSOLO50
Registered User

Trader Feedback: (8)
 
Join Date: Mar 2002
Location: Santa Clara, CA
Posts: 439

Previous best: 5.64 at 124mph w/ a 1.26 sixty foot
Last week: 5.61 at 109 mph w/ a 1.25 sixty foot

As you can see from the mph, I shut her down before the 1/8 mile marker. I'm pretty sure I can get a 5.4 out of it next time out.
TeamSOLO50 is offline   Reply With Quote
Old 10-03-2008, 08:33 PM   #338
NA 99 SVT
Registered User

Trader Feedback: (0)
 
Join Date: Aug 2008
Location: New Brunswick, Canada
Posts: 3

99 Cobra, JLT RAI, UDP's, X pipe + CB and 4.56's.

7.76, 86.87mph with a 1.639 60ft
__________________
99 Cobra - 299.87 rwhp - 1.63 60ft - 12.17 @ 111.94 mph
NA 99 SVT is offline   Reply With Quote
Old 10-04-2008, 04:52 PM   #339
bykr
Registered User
 
bykr's Avatar

Trader Feedback: (10)
 
Join Date: Jul 2006
Location: Hesperia,CA
Posts: 839

6.67@104 mph on motor (car is setup for N20)
__________________
'91 Hatch-12:1 408,fogger,C4 5.83@117 1.23 60ft.
bykr is offline   Reply With Quote
Old 10-06-2008, 01:14 PM   #340
TeamSOLO50
Registered User

Trader Feedback: (8)
 
Join Date: Mar 2002
Location: Santa Clara, CA
Posts: 439

Quote:
Originally Posted by TeamSOLO50 View Post
Previous best: 5.64 at 124mph w/ a 1.26 sixty foot
Last week: 5.61 at 109 mph w/ a 1.25 sixty foot

As you can see from the mph, I shut her down before the 1/8 mile marker. I'm pretty sure I can get a 5.4 out of it next time out.
5.51 @ 127.5 riding the dots...not the 5.4 I wanted, but we're close!
TeamSOLO50 is offline   Reply With Quote
Old 10-06-2008, 02:29 PM   #341
Mr.Blue
Registered User
 
Mr.Blue's Avatar

Trader Feedback: (34)
 
Join Date: Nov 2006
Location: Northwest,FL
Posts: 397

1.51 '60
6.994 1/8th
97.87 MPH

302 H/C/I slicks etc......short video (Thanks Eric)

http://www.youtube.com/watch?v=RxD1Ox5VMGI
__________________
'89 GT: STOCK shortblock 5spd./TW/SYSTEMAX/N4=6.80@100.42
Rodney Tolleson #008 ALL MOTOR ALL THE TIME
Mr.Blue is offline   Reply With Quote
Old 10-06-2008, 03:13 PM   #342
blown65
Registered User
 
blown65's Avatar

Trader Feedback: (8)
 
Join Date: Jun 2000
Location: medford, oregon
Posts: 301

6.75@100mph 1.49 60'
__________________
N/A 347 Victor Jr heads, Victor Jr Intake, Solid Roller Cam.
Best ET 10.21@131.5
vimeo.com/album/96050
blown65 is offline   Reply With Quote
Old 10-07-2008, 04:08 AM   #343
brianj5600
Registered User

Trader Feedback: (0)
 
Join Date: Jul 2003
Location: Middle Tn.
Posts: 126

6.93 @ 100mph, 1.58 60'



vid: http://videos.streetfire.net/video/69410045_177035.htm
__________________
'67 coupe, blow-thru 351w T-70, C4/C5, 8.8 6.93@100.43
brianj5600 is offline   Reply With Quote
Old 10-09-2008, 06:56 PM   #344
tar 71
Registered User
 
tar 71's Avatar

Trader Feedback: (12)
 
Join Date: Dec 2002
Location: Mt.Vernon, IL
Posts: 289

86 Mustang GT 347, tremec, 4.10's and 17' DR's.

1.675 60'

7.774@93.38mph

Best speed ever was a 94.30mph.
tar 71 is offline   Reply With Quote
Old 10-09-2008, 10:45 PM   #345
spot_84
Registered User

Trader Feedback: (9)
 
Join Date: Oct 2003
Location: newark de
Posts: 790

8.23@85
stock bottom end,afr165 heads,1.6 rockers,534-544 cam and 5 speed
spot_84 is offline   Reply With Quote
Old 10-10-2008, 04:57 PM   #346
SLO 5-OH
Registered User
 
SLO 5-OH's Avatar

Trader Feedback: (6)
 
Join Date: Sep 2006
Location: Stuarts Draft, VA
Posts: 449

My best 1/8 mile is 7.85 @ 86.2 at Virginia Motorsports Park.
The run resulted in a 1/4 mile time of 12.41 @ 107.3 mph.
Two different dyno sessions had 250 and 258 rwhp.

I have a 1989 GT Hatchback with:
  • Stock bottom end
  • Trickflow Twisted Wedge street heads
  • Ported GT-40 intake (original tubular style with ported lower)
  • B-303 cam with 1.7 rockers
  • 75mm Pro-M mass air
  • 65mm Ford throttle body
  • 1-5/8" longtubes with Mac Prochamber and 3-chamber Flowmasters
  • Built AOD with Lentech valvebody and 3200 stall non-lockup converter
  • 4.10 gears
  • 275/50-15 Mickey Thompson drag radials
  • Skinny front tires
  • A/C delete and manual steering
  • Aluminum driveshaft
  • Stock rear springs and 4-cyl front springs
  • 50/50 rear shocks and 30/70 front struts
  • 3335 lbs with driver
Dean
__________________
1989 Mustang GT: Sonic Blue with 347 & AOD
11.40 @ 115.04 with 317 rwhp
2005 GTO: Impulse Blue with 6.0 and 6-speed
Daily Driver with 338 rwhp - Stock
SLO 5-OH is offline   Reply With Quote
Old 10-20-2008, 09:06 AM   #347
ratedz
Registered User
 
ratedz's Avatar

Trader Feedback: (3)
 
Join Date: Aug 2006
Location: Ohio
Posts: 951

New best yesterday

6.74@102
__________________
1986 Mustang GT
skilledit.com
ratedz is offline   Reply With Quote
Old 10-20-2008, 10:10 AM   #348
itsrlong
Registered User
 
itsrlong's Avatar

Trader Feedback: (9)
 
Join Date: Jul 2003
Location: Conover, N.C.
Posts: 1,313

When did you start spraying it? Or did you swap in a 347?

Quote:
Originally Posted by Mr.Blue View Post
1.51 '60
6.994 1/8th
97.87 MPH

302 H/C/I slicks etc......short video (Thanks Eric)

http://www.youtube.com/watch?v=RxD1Ox5VMGI
__________________
LaserRed '95 GT:Just a little 306
itsrlong is offline   Reply With Quote
Old 10-20-2008, 01:17 PM   #349
rdub79
Registered User
 
rdub79's Avatar

Trader Feedback: (48)
 
Join Date: Aug 2005
Location: Martinsville, IN
Posts: 1,280

Car in sig @ 3150lbs

On motor:

1.77 60ft
5.34 330ft
8.442 1/8th
78.94 mph

100 Shot Dry spraying 30ft out

1.67 60ft
4.92 330ft
7.778 1/8th
86.71 mph
__________________
88' Coupe, bone stock 5.0, AOD, 3.73
DIY 60mm Turbo Kit, water/meth inj,
7.09 @ 99mph w/ a 1.71 60ft,14psi
rdub79 is offline   Reply With Quote
Old 10-20-2008, 07:24 PM   #350
Mr.Blue
Registered User
 
Mr.Blue's Avatar

Trader Feedback: (34)
 
Join Date: Nov 2006
Location: Northwest,FL
Posts: 397

Quote:
Originally Posted by itsrlong View Post
When did you start spraying it? Or did you swap in a 347?

Thanks for the compliment, all motor 302, 220,000 mile shortblock driven to the track

Ran a 7.02, 7.03, 7.03, 7.04 and a best mph of 98.23 saturday night and i'll be beatin on it this friday and saturday at the track.
__________________
'89 GT: STOCK shortblock 5spd./TW/SYSTEMAX/N4=6.80@100.42
Rodney Tolleson #008 ALL MOTOR ALL THE TIME
Mr.Blue is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:46 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.
© 2010 Corral.net