I have changed directions with my 67 Shelby Clone, and no longer plan to turbocharge it. The kit is located in Easton, PA. I should be able to get updated pictures by this weekend.
I bought everything from a friend who built it and put approximately 500 miles on the car, and made about ten passes with the kit.
Precision Engine and Turbo pt GTS 76mm Turbo (96 AR).
Applied Technologies 44mm Wastegate.
Vortech Max Flow Blow Off Valve.
Hot and cold side plumbing. Inverted BBK Shorties with V Band clamps, 3" hot side to turbo, the 4" Down pipe and exhaust running through a single Dynomax muffler which exists before the rear tire.
* You will need to cut a whole in the driver side forward fender apron for the turbo.
I also have a New MMR Street/ Strip fuel system w/ 83lb injectors which I would be willing to sell aswell, $1600.00
* I am interested in trades and will entertain serious offers. I am specifically interested in a set of Kirkey/ Ultrashield economy aluminum seats, and a aluminum 9" third member.