Ford Mustang Forums banner

where to get?

254 views 1 reply 2 participants last post by  89swap 
#1 · (Edited)
Just got a throttle body plate kit and was wondering where I can get some longer throttle body studs?

What size threads are on the shrader(spelling???) valve that goes into the fuel line?

Also would mounting the bottle at more of an angle thatn what the brackets have be a problem?

Thanks,
Cody
 
#2 ·
throttle body studs=home depot or lowes threaded rod and nuts
schrader valve= 1/16...get the adapter from someone who does nos or russell hose ends
the best way is at that angle but, straight up and down is ok, but you usually don't get 100% of bottle usage. racers don't care because they usually fill their own bottles and go after each run
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top