Ford Mustang Forums banner

How to use a multimeter when testing TPS

1K views 7 replies 5 participants last post by  leakyfaucet 
#1 ·
I'm gonna buy a radio shack digital multi meter to set my TPS voltage. On the meter it has DC volts 2v,20v,200v,500v and AC volts 200v, 500v where do I set the meter to get the proper reading of .90 to .98 volts. Also is this test done with the engine on.
 
#3 ·
Thanks buddy for the help
 
#5 ·
my meter does not have a 2v setting it has dcv 1000. 200, 20 ,2000m, 200m ,which setting do i use.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top