Corral

NeoTokyo · 07-10-2005, 01:57 AM

Heya everyone;

Im looking for the CC volume to 0F19 heads from my wifes 71' Mach 1 w/ the 351C 4V.

We need the CC to figure out what pistons to get for her rebuild.

Thanks again everyone.

-April and Eric-

NeoTokyo · 07-12-2005, 10:05 PM

*BUMP*

michael85 · 07-13-2005, 10:11 PM

you have to measure them to know the cc.
the N54 board had a thread on the subject and everyone that measured their heads came up with different numbers.

bullittstang95 · 07-14-2005, 10:13 AM

The Ford Performance book from 1979 gives the following 351C CC volumes:
1970 351C 4V- 61.3-64.3
1971 351C 4V & Boss- 64.6-67.6
1971 CJ, 4V/CJ 72 & 72 HO- 73.9-76.9
Hope this helps.

Kato Engineering · 07-14-2005, 03:56 PM

you stated it was a 1971 head,

but you allso state that the DAY CODE os ..."0F19"

Kato Engineering · 07-14-2005, 03:58 PM

so does the other normal letter number prefix read as ..."D0ZZ or D1z ?"
or something else...
you need both of the numbers to have a complete designation code.

07-10-2005, 01:57 AM	#1
NeoTokyo Registered User Trader Feedback: (4) Join Date: Jul 2005 Location: Redding Ca. Posts: 286	CC info on 71' Mach1 4V heads on 0F19 Heya everyone; Im looking for the CC volume to 0F19 heads from my wifes 71' Mach 1 w/ the 351C 4V. We need the CC to figure out what pistons to get for her rebuild. Thanks again everyone. -April and Eric-

07-14-2005, 10:13 AM	#4
bullittstang95 Registered User Trader Feedback: (0) Join Date: Jun 2005 Posts: 36	The Ford Performance book from 1979 gives the following 351C CC volumes: 1970 351C 4V- 61.3-64.3 1971 351C 4V & Boss- 64.6-67.6 1971 CJ, 4V/CJ 72 & 72 HO- 73.9-76.9 Hope this helps. __________________ 95 gt aode: 3.73's, 65mm tb, mac cai, 9mm wires, fluidyne radiator, bbk u/d's, fms ceramic shortys, mac o/r h pipe, and mac cat back coming soon: 302 bored 40 over with lightweight forged pistons, crane 2031 cam, ported upper and lower cobra intake, ported iron gt40 heads with 1.7 roller rockers, 24lb injectors, granatelli maf, adj. fpr and pa aode with 2500 stall

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Corral

Popular

Support the Corral! Click Here:

Support the Corral! Click Here:

Remove Advertisements Sponsored Links
Corral.net Advertisement

07-12-2005, 10:05 PM	#2
NeoTokyo Registered User Trader Feedback: (4) Join Date: Jul 2005 Location: Redding Ca. Posts: 286	BUMP

07-13-2005, 10:11 PM	#3
michael85 Registered User Trader Feedback: (0) Join Date: Aug 2000 Location: BC Canada Posts: 347	you have to measure them to know the cc. the N54 board had a thread on the subject and everyone that measured their heads came up with different numbers.

07-14-2005, 03:56 PM	#5
Kato Engineering Registered User Trader Feedback: (0) Join Date: Oct 2003 Location: Devore Hts, Calif...FIRE COUNTRY Posts: 17,857	you stated it was a 1971 head, but you allso state that the DAY CODE os ..."0F19"

07-14-2005, 03:58 PM	#6
Kato Engineering Registered User Trader Feedback: (0) Join Date: Oct 2003 Location: Devore Hts, Calif...FIRE COUNTRY Posts: 17,857	so does the other normal letter number prefix read as ..."D0ZZ or D1z ?" or something else... you need both of the numbers to have a complete designation code.