What alt braket are you guys using to move the alt in to clear a pass side turbo. Looks like 1" would do. I am also keeping ac and ps with the factory braket. this is on a 302 based in a 89 Mustang.
I run the model 1465 but I don't run ac just ps. The one you need is 30028 and modify the ac bracket a little to fit the adjustment rod. The only difference between the 1465 and the 30028 is the 30028 is billet aluminum and has a smaller adjustment rod which should work with the ac bracket with a little modification.
What do you use for a tensioner? Or does that rod from the AC Bracket adjust in and out? I am installing a 76mm passenger side and have the 130 amp with clearance problems also. To be clear, thats the March 1465? I too am keeping PS and AC with no smog pump.
does anyone know of a setup like these,that will work on a sn95? or is it a matter of cutting down the spacers to get the alt pulley to line up with the other accessories?
just thought i would ask,since on this subject,thanks
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Ford Mustang Forums
9.8M posts
200.6K members
Since 2001
A forum community dedicated to Ford Mustang owners and enthusiasts. Come join the discussion about performance, production numbers, VIN decoders, modifications, troubleshooting, power adders, DIY tutorials, and more!